CTY12/6.7.9GB
12 t Lithium Battery Mine Locomotive
CTY12/6.7.9GB: The CTY12 lithium battery mine locomotive is a rail haulage platform for mine cars carrying minerals, equipment and personnel. The supplied technical data describes a 12 t adhesive mass and twin traction motors.
Built around your working task.
Review the model and technical reference together with your application requirements. Provide track gauge, haulage load, gradients and minimum curves. Describe battery charging and operating-cycle requirements.
Inquire about CTY12/6.7.9GBTechnical specifications
Confirm the exact gauge and configuration. The model suffixes and gauge values differ across the supplied tables. Track gauge and external dimensions are therefore not specified here.
| Adhesive mass | 12 t |
|---|---|
| Battery capacity | 500 Ah |
| Rated voltage | 192 V |
| Motor power | 2 × 22 kW |
| Hourly rated speed | 8.7 km/h |
| Maximum speed | 17.4 km/h |
| Hourly traction | 16.48 kN |
| Maximum traction | 29.43 kN |
| Wheelbase | 1220 mm |
| Minimum curve radius | 10 m |
Check the operating conditions.
Provide track gauge, haulage load, gradients and minimum curves. Describe battery charging and operating-cycle requirements.
Check the current technical sheet against the configuration in the quotation. Dimensions, interfaces and operating requirements should be confirmed before planning the installation.
Understand the 12 t locomotive reference
CTY12/6.7.9GB is a lithium battery mine locomotive with a documented adhesive mass of 12 t. That figure describes locomotive mass carried for adhesion; it is not the weight of a train the locomotive is guaranteed to haul. The required train and track duty must be reviewed separately.
The reference lists two 22 kW traction motors, chopper speed regulation and mechanical braking. Hourly traction and maximum traction are separate ratings. Include wagon mass, payload, gradients and the required operating cycle when discussing how those ratings relate to your haulage task.
Battery charging and operating conditions
The 500 Ah battery capacity is stated at the five-hour rate.
The battery sheet gives a standard charge current of up to 200 A and an approximate charging time of 2.5 hours. Continuous discharge current is 200 A; the 400 A peak rating is limited to 20 seconds.
The locomotive operating envelope is stated as −20°C to 40°C and altitude up to 2000 m. The battery sheet separately gives a 0°C to 45°C charging range and a −20°C to 55°C discharging range.
These battery figures describe the referenced pack. Confirm the battery and charger supplied with the locomotive; charging time is approximate and is not an operating-runtime guarantee.
Track gauge and battery system need a matched configuration
The designation and dimensional table do not use the same suffixes, and the gauge information varies between the narrative and table. Give your actual track gauge and request the matching locomotive drawing. Do not choose a gauge by decoding the model name alone.
A 192 V, 500 Ah battery reference is recorded in the source. Battery capacity is not a published shift-runtime guarantee. Provide the expected operating hours, route and available charging facilities, then ask for the complete battery and charger specification for the quoted locomotive.
Compare rail-haulage options by duty
The CTY5 and CTY3.5 listings provide smaller adhesive-mass references. Compare their traction, curve radius, controls and battery arrangements against the same route information. A lighter or heavier locomotive is not automatically the better match without the train and track requirements.
The CTY12 source includes explosion-protection wording, but a current application-specific certificate has not been verified. If your mine requires such equipment, request the relevant certification and configuration documentation before treating this listing as suitable.
Selection questions
What should I include in a product inquiry?
Provide track gauge, haulage load, gradients and minimum curves. Describe battery charging and operating-cycle requirements.
Which technical details need confirmation?
Confirm the exact gauge and configuration. The model suffixes and gauge values differ across the supplied tables. Track gauge and external dimensions are therefore not specified here.
How do I request the selected configuration?
Send the model or series reference and your project requirements through the inquiry link. Include drawings or the existing equipment reference where available.
Does the 12 t rating describe hauled payload?
No. It is the adhesive mass recorded for the locomotive. Haulage suitability needs the complete train mass, track geometry, gradients, braking requirements and operating duty.