CTY3.5/6/G48
3.5 t Battery Mine Locomotive
CTY3.5/6/G48 is a compact battery locomotive for small mine tunnels and shunting applications. The specification lists a 600 mm gauge, 48 V battery supply and two traction motors.
Built around your working task.
Review the model and technical reference together with your application requirements. Provide track gauge, haulage load, gradients and minimum curves. Describe battery charging and operating-cycle requirements.
Inquire about CTY3.5/6/G48Technical specifications
Confirm the selected control and equipment configuration. Any explosion-protected requirement needs its own configuration and certificate review.
| Adhesive mass | 3.5 t |
|---|---|
| Track gauge | 600 mm |
| Hourly traction | 3.9 kN |
| Hourly rated speed | 5.4 km/h |
| Battery voltage | 48 V |
| Battery capacity | 330 Ah |
| Motor power | 2 × 4.8 kW |
| Minimum curve radius | 5 m |
| Dimensions L × W × H | 2350 × 914 × 1550 mm |
Check the operating conditions.
Provide track gauge, haulage load, gradients and minimum curves. Describe battery charging and operating-cycle requirements.
Check the current technical sheet against the configuration in the quotation. Dimensions, interfaces and operating requirements should be confirmed before planning the installation.
Compact mine rail transport and shunting
The CTY3.5/6/G48 battery mine locomotive is described for small mine tunnels and shunting. Its reference configuration combines a 600 mm track gauge with a 48 V battery supply and 3.5 t adhesive mass. The adhesive-mass figure should not be read as a hauled payload rating.
The document lists two 4.8 kW motors and a closed gearbox transmission. Resistance or chopper control is described as an option, so identify the control arrangement required rather than assuming both are fitted. Include the wagon and track information needed to review the proposed haulage duty.
Track and coupling interfaces
The specification gives a 650 mm wheelbase and hook-centre heights of 210 or 320 mm. Match the selected coupling height to the mine cars as well as checking the 600 mm track gauge.
The locomotive is described for small tunnels and small to medium shunting duties. The control selection is resistance or chopper control, with a closed gearbox and a mechanical internal-expanding shoe brake.
Check a compact locomotive against the whole route
Reference dimensions are 2350 × 914 × 1550 mm, with a minimum curve radius of 5 m. These values help start a clearance review, but the train's wagons and couplings also matter. Provide the route layout, loading points and any restricted clearances for the complete train.
The battery reference is 330 Ah. Ask for the offered battery and charging arrangement against your schedule; the catalogue does not establish how long every duty cycle will run between charges. The braking description is a mechanical internal-expanding shoe arrangement and should be reviewed with the intended train duty.
Clarify options in the purchase specification
The source discusses general and explosion-protected versions without supplying a separately verified current certificate. State the operating environment and required approvals at the inquiry stage. Do not treat a general model description as proof that a particular configuration meets your site requirements.
Warranty start points are inconsistent in the available document, so request the actual warranty terms in the quotation. If you are comparing CTY3.5 with CTY5, compare route suitability and equipment scope alongside adhesive mass rather than selecting by model size alone.
Selection questions
What should I include in a product inquiry?
Provide track gauge, haulage load, gradients and minimum curves. Describe battery charging and operating-cycle requirements.
Which technical details need confirmation?
Confirm the selected control and equipment configuration. Any explosion-protected requirement needs its own configuration and certificate review.
How do I request the selected configuration?
Send the model or series reference and your project requirements through the inquiry link. Include drawings or the existing equipment reference where available.
Is this a 3.5 t payload locomotive?
The supplied 3.5 t figure is adhesive mass. The train load requires a separate review of the wagons, gradients, curves and braking duty.