ZDPC-22H
Underground Personnel Carrier
ZDPC-22H: The supplied personnel carrier document is titled ZDPC-22H, while its body names ZDPC-22. Review the described diesel, four-wheel-drive transport configuration with ZONGDA and confirm the model before using the reference data below.
Configuration review
Review the model and technical reference together with your application requirements. Specify the crew capacity you need, boarding arrangements, route clearances, gradients and operating conditions.
Inquire about ZDPC-22HSupplied document reference
The cover identifies ZDPC-22H while the body identifies ZDPC-22. The values below are document references pending confirmation for the model being quoted. Request a model-matched technical sheet; do not use these values for final site planning.
| Passenger capacity | 22 people |
|---|---|
| Forward speed, gear I / II | 15 / 25 km/h |
| Maximum gradeability, loaded | 14° |
| Traction force | 80 kN |
| Turning radius | 6610 mm |
| Steering angle | ±40° |
| Ground clearance | 295 mm |
| Dimensions L × W × H | 8360 × 2000 × 2420 mm |
| Operating weight | 10000 kg |
| Electrical system | 24 V DC |
Check the operating conditions.
Specify the crew capacity you need, boarding arrangements, route clearances, gradients and operating conditions.
Check the current technical sheet against the configuration in the quotation. Dimensions, interfaces and operating requirements should be confirmed before planning the installation.
Plan the passenger transport duty
The ZDPC-22H personnel carrier listing concerns underground trackless transport of people. Start the selection with the intended passenger group, boarding locations and route. The source records a capacity of 22 people, but the body also uses ZDPC-22; the exact seating and model specification need to be confirmed together.
Passenger transport requires its own review. An operating weight, traction figure or travel-speed reference does not establish suitability for a particular route or passenger arrangement. Provide the site requirements for access, seating and passenger protection when requesting the configuration.
Documented construction and equipment
The following details describe the supplied document reference. They remain subject to confirmation for the exact model named on the quotation.
The described brake arrangement combines wet multi-disc service brakes with an axle spring parking brake.
The articulated hydraulic steering system uses steering cylinders on both sides. Its reference maximum hydraulic pressure is 16 MPa.
The document lists a 120 L hydraulic oil tank, a 120 L fuel tank and 25 L for the transmission.
Review the articulated carrier and access points
The technical description includes four-wheel drive, wet multi-disc service brakes and articulated hydraulic steering. These describe the carrier's layout. For route planning, request a model-matched drawing showing the travelling envelope and the space needed for boarding and leaving the vehicle.
Include intersections, gradients, waiting areas and the narrowest access points in the route information. Part of the supplied document refers to a different loader model, so those operating-envelope statements must not be applied to this personnel carrier. The limitations below identify the unresolved reference information.
Specify what the passenger vehicle quotation must cover
Ask for the seating layout, passenger access arrangement, included equipment and operating documentation. Give the expected trips, destination country and mine environment. Any site approval or certification requirement should be named explicitly and checked for the offered configuration.
If your project also needs equipment service or concrete transport, treat those vehicles as separate duties. A personnel carrier inquiry should remain focused on transporting people, with the final passenger capacity and vehicle configuration recorded on the quotation.
Selection questions
What should I include in a product inquiry?
Specify the crew capacity you need, boarding arrangements, route clearances, gradients and operating conditions.
Which technical details need confirmation?
The cover identifies ZDPC-22H while the body identifies ZDPC-22. The values below are document references pending confirmation for the model being quoted. Request a model-matched technical sheet; do not use these values for final site planning.
How do I request the selected configuration?
Send the model or series reference and your project requirements through the inquiry link. Include drawings or the existing equipment reference where available.
Can the loader operating conditions in the document be applied to this carrier?
No. A section names a different loader. Use a confirmed ZDPC-22H technical sheet and route review for the personnel carrier rather than transferring the other machine’s operating limits.